ASENWARE Fire Alarm System – AW-D102 Heat detector

Reviews Summary by AI:


Asenware AW-D102 heat detector is an intelligent rate of rise heat detector, which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given specific ID, which allows the panel to continuously monitor specific detector location (point). It reduces the maintenance cost and makes it easier to maintain the system.

• Addressable-analog communication
• Rate-of-rise feature activates when ambient
temperature increases at the rate of 7.1 ℃
• Low Standby current
• Two-wire connection
• Two LEDs (RED), blinks in normal condition and becomes stationary during fire
alarm condition.
• Remote test from Panel

Spacing of detector must be followed by standard EN 54 or NFPA 72. N FPA 72
suggests for low airflow application spacing of 9.1 m for ceiling height up to 3.15 m can
be applicable. However, please follow the specific codes and local codes for specific

Model No. AW-D102
D/C 1712
Operating Voltage Range 18V-28VDC
Alarm Current ≤3mA
Work Current ≤2.5mA
Temperature -10℃ to 50℃
Fix Temperature Range 57℃ A2R
Rate of Rise Alarm 7.1℃/5S A2R
Standard Number Ref EN 54-5:2000
Size 99.80 mm
Terminals Connection No 6: Remote Indicator+
No 3: Remote Indicator-
No 2: Loop IN+
No 5: Loop IN-