ASENWARE Fire Alarm System – AW-D103 Addressable Combination Detector (Heat & Smoke)

Reviews Summary by AI:


Asenware AW-D103 is combination heat and smoke detector, it is an intelligent addressable detector, which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given specific ID, which allows the panel to continuously monitor specific detector location (point). It reduces the maintenance cost and makes it easier to maintain the system. It provides fire signal when both conditions are satisfied which reduces the chances of false alarm. The heat sensing portion utilizes a proven thermistor for accurate and reliable heat detection.

• Addressable-analog communication
• Low standby current for continuous monitoring
• Two-wire connection
• Two LEDs (RED), blinks in normal condition and becomes steady during fire alarm
• Remote test from Panel

Spacing of detector must be followed by standard EN 54 or NFPA 72. NFPA 72 suggests for low airflow application spacing of 9.1 m for ceiling height up to 3.15 m can be applicable. However, please follow the specific codes and local codes for specific applications.

Model No. AW-D103
D/C 1712
Operating Voltage Range 18V-28V DC
Alarm Current ≤3mA
Work Current ≤2.5mA
Temperature -10℃ to 50℃
Smoke Sensitivity 0.1-0.15dB/m
Fix Temperature Range 57℃ A2R
Rate of Rise Alarm 7.1℃/5S
Standard Number Ref EN 54-5:2000
Size 99.80mm
Terminals Connection No 6: Remote Indicator+
No 3: Remote Indic
No 2: Loop IN+
No 5: Loop IN-